LEVELLING COMPOUNDS

Fast-Flex

PALACE FAST-FLEX FLOOR LEVELLER is recommended for application over a comprehensive range of floor surfaces such as tamped or worn concrete and sand/cement floor screeds as well as non-porous floors such as mastic asphalt, plywood and mildly abraded power-floated concrete. It is particularly suited for installation in conjunction with heated sub-floors and can readily accommodate most types of wire-based sub-tile heating systems.

 
  • Excellent levelling & flow to give a super-smooth finish
  • High early strength takes foot traffic after 3 hours
  • Can be laid from 2mm up to a 30mm bed depth
  • Ideal for use with underfloor heating systems
  • Single-Part, protein free formula for pump application
  • Fix tiles after 4 hours & floor- coverings after 24 hours.
 

Thick-Bed

PALACE THICK-BED FLOOR LEVELLER is recommended for application over a broad range of floor surfaces such as tamped or worn concrete and sand/cement floor screeds as well as the more challenging non-porous floors such as mastic asphalt, plywood and dense impermeable surfaces. It is particularly suited for installation alongside heated sub-floors where its’ ability to be laid to a thick-bed is usually sufficient to accommodate most types of wire-based heating systems.

  • Fast Setting, flexible & Fibre reinforced performance
  • High early strength takes foot traffic after 3 hours
  • Can be laid from 3mm up to 80mm bed depth
  • Ideal for use with underfloor heating systems
  • Single-Part, protein free for pump & trowel application
  • Receives tiles after 4 hours & vinyl coverings after 24 hours.

Pack Size: 20kg

Self-Level Levelling Compound

SELF LEVEL FLOORING COMPOUND is a cement-based, protein-free, sub-floor smoothing under-layment, giving a consistently level screed from 2mm up to 12mm thick. When mixed with water it gives the ideal smooth finish properties needed for application over masonry-based floor surfaces such as tamped or worn concrete and sand/cement floor screeds. On non-porous floors such as mastic asphalt, plywood and painted or sealed surfaces, the SELF LEVELLING FLOORING powder should be mixed with SELF-LEVEL LATEX to give improved adhesion to the substrate with enhanced abrasion and point-load resistance.

Conforms to: EN13813:2002 – C30:F7

  • Evens out uneven tamped concrete
  • Fast setting – sets in 3 hours
  • Highly flowable smooth finish underlayment
  • Suitable for up to 12mm depth screed in a single pour
  • Can be enhanced with FLOOR SCREED LATEX

Pack Size: 20kg

Self-Level Floor Leveller

PALACE SELF-LEVEL is a protein free cement-based, sub-floor smoothing underlayment that has been formulated to provide a consistently level finish to solid sub-floors prior to laying ceramic or decorative floor coverings, giving a consistently level screed from a 2mm up to 12mm thick. PALACE SELF-LEVEL incorporates specially blended cements, finely grade sands and organic super-plasticisers, which with the addition of correctly gauged water gives the ideal properties for application to masonry-based floor surfaces such as tamped or worn concrete and sand/cement floor screeds. On non-porous floors such as mastic asphalt, plywood, dense concrete, existing tiles and painted or sealed surfaces, PALACE SELF-LEVEL powder should be mixed with PALACE SELF-LEVEL LATEX to give improved adhesion to the substrate and allows the product to be used on floors where under-tile heating is to be specified.

  • High Flow fast levelling to a super smooth finish.
  • Takes foot traffic after 4 hours & tiling after 8 hours.
  • Levels from 2mm up to 12mm in a single application.
  • Can be mixed with water or Palace Self Level Latex.
  • Use Floor Screed latex for heated sub-floors.
  • Protein & ammonia-free low odour formulation

Pack Size: 20kg & 5litre

Flow-Level Floor Leveller

PALACE FLOW-LEVEL is a 2-part (bag & bottle) floor levelling compound ideal for use when preparing sub-floors to receive decorative floor coverings where it is essential that the smoothest possible level surface finish is achieved prior to laying decorative floor finishes such as vinyl, laminate, parquet, carpet underlay and ceramic tiles. Receiving substrates include sand/cement screeds, concrete, plywood, tile backer boards, flooring grade asphalt, anhydrite screeds* Epoxy DPMs, rigid steel decking and existing ceramic & porcelain tiles.

  • Fast Drying – ready to walk on after 90 minutes
  • High Flow easy levelling to a super smooth finish
  • Readily bonds to most common sub-floors without priming
  • Can be laid over pre-existing stable adhesive residues
  • Can be laid from 2mm up to 12mm bed depth
  • Suitable for use with heated sub- floors and plywood overlay

Pack Size: 20kg & 5litre

Fast-Track 2

PALACE FAST-TRACK 2 is a 2-Part (bag & bottle) floor leveller that offers the flooring professional the ideal solution for overcoming time limited projects, where a fast-track approach at all stages of floor levelling is essential to achieving the perfect finished flooring result. Ceramic tiles can be applied within 1 hour whilst decorative (vinyl / carpet / laminate) floor coverings can be applied to internal subfloors in as little as 90 minutes whilst resin coatings should be allowed 24 hours curing before being laid.

  • Ultra-Fast Drying – ready to walk on after 30 minutes
  • Ready to receive ceramic tiles after 45 minutes
  • Apply decorative floor finishes after 90 minutes
  • Levels from 2mm up to 25mm in a single application
  • Bonds to existing ceramic / vinyl tiles & steel decking
  • Suitable for use with heated sub- floors and plywood overlay.

Pack Size: 20kg & 4.5litre

PROLEVEL ONE: DEEP FILL FLOOR LEVELLER

UltraTileFix ProLevel One is a single part, high strength, rapid drying and curing cementitious smoothing and levelling compound. The product’s formulation incorporates a blend of specially graded fillers, cements and polymers with a rapid curing profile to enable early fixing of tiles even at thicker depth applications.

  • Internal use
  • Formulated for depths up to 60mm in one application
  • Flexible properties for use with underfloor heating systems
  • 3-60mm depth
  • 3 hours set time
  • Tile after 8 hours
  • 20kg : 3.4L mixing ratio
  • Conforms to CT C35 F6 EN 13813 classification
  • Lifetime guarantee

Pack Size: 20kg

PROLEVEL TWO: FLEXIBLE TWO PART FLOOR LEVELLER

UltraTileFix ProLevel Two is a mid-strength smoothing underlayment. A two-component system consisting of a powdered blend of cements, graded fillers and additives, and a pre-gauged polymer liquid. Tiles can be applied to the internal subfloors in as little as 24 hours and its fast set time enables light foot traffic in 2.5 hours.

 

  • Internal use
  • Convenient to mix
  • Moisture tolerant
  • Excellent flexibility for timber floors and underfloor heating systems
  • 2-15mm depth
  • 2.5 hours set time
  • Tile after 24 hours
  • 1 bag : 1 bottle mixing ratio
  • Conforms to CT C25 F5 EN 13813 classification
  • Lifetime guarantee

Pack Size: 20kg & 4L

PROLEVEL FIBRE: REINFORCED FLEXIBLE FLOOR LEVELLER

UltraTileFix ProLevel Fibre is a single part, high strength, rapid drying and curing concrete floor leveller. The product’s formulation incorporates a blend of specially graded fillers, cements, polymers and fibres. Our specially formulated fibre technology aids application and strength resulting in a strong, sound and even base ready to commence the tiling process after only 8 hours.

 

  • Internal use
  • Formulated with FibreBond technology
  • Excellent flexibility for timber floors and underfloor heating systems
  • 3-75mm depth
  • 3 hours set time
  • Tile after 8 hours
  • 20kg : 3.4L mixing ratio
  • Conforms to CT C35 F6 EN 13813 classification
  • Lifetime guarantee

Pack Size: 20kg 

PROLEVEL RAPID: FIBRE REINFORCED FLEXIBLE FLOOR LEVELLER

UltraTileFix ProLevel Rapid is a single part, high strength, rapid drying and curing cementitious smoothing underlayment. The product’s formulation incorporates a blend of specially graded fillers, fine cements, polymers and fibres. Our specially formulated fibre technology aids application and strength resulting in a strong, sound and even base ready to commence the tiling process after only 45 minutes.

 

  • Internal use
  • Ideal for fast track projects with same day tiling
  • Formulated with FibreBond technology
  • Exceptional flexibility for timber floors and underfloor heating systems
  • 2-15mm depth
  • 30 minutes set time
  • Tile after 45 minutes
  • 20kg : 4.5L mixing ratio
  • Conforms to CT C35 F7 EN 13813 classification
  • Lifetime guarantee

Pack Size: 20kg 

Scroll to Top